Penrite P26 DPF Cleaner Aerosol
P26 DPF Cleaner Aerosol is an easy-to-use, professional strength, workshop grade Diesel Particulate Filter (DPF) cleaner which effectively cleans and loosens carbon and ash deposits in a DPF. Its foaming formulation deeply penetrates into the pores of the honeycomb structure of a DPF.
Features
- Professional strength, workshop grade formula
- Easy-to-use aerosol application
- Foaming formulation for deep penetration
- Effectively removes carbon and ash deposits
- 400ml capacity
Instructions for Use
- Allow engine and DPF to cool down to ideal temperature between 10°C - 40°C
- Insert the tube of the aerosol through the Pressure Sensor or Temperature Sensor opening with spraying direction towards the filter
- Spray the product into the DPF in bursts (3 to 5 times), with intervals of 5 minutes between bursts until entire contents are used
- Let the product soak for a minimum of 30 minutes
- Reconnect the Pressure Sensor hose or Temperature sensor
- Place an oil pan or suitable container under the outlet of the exhaust system
- Start the engine - dirty water (contaminated with soot and ash) will drip out of the exhaust pipe
- Let the engine idle until the dripping stops
- Perform a manual regeneration cycle with a diagnostic tool or drive the vehicle for 20-30 minutes at higher engine speeds than normal to heat up the DPF and assist in regeneration
- If necessary, clear error messages with a Diagnostic or Scan Tool
To maximise the cleaning of the DPF, Penrite suggests adding a bottle of Penrite Enviro+ DPF Cleaner to the fuel following the aerosol cleaning as this will lower the burning temperature of the soot and assist in a more complete regeneration of the DPF.
