Product Overview
Permatex PermaPoxy 5 Minute Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials such as hard and soft plastics to specified surfaces. This Plastic Welder forms a tough, durable bond to most plastics, composites, ceramics, and wood in any combination.
Features
- Fast Curing: Gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes
- High Strength: Permanent strength up to 3500 PSI
- No Primers Required: Sets in five minutes at room temperature
- Cream Appearance: Off-white/cream colored finish when cured
- Gap Filling: Fills gaps up to 0.125 inch (3.2mm)
- Temperature Range: Operating range from -60°F to 250°F (-51°C to 121°C)
- Resistant: Water resistant and good chemical resistance
- Volume: 0.84 fl oz (25ml) dual syringe package
Bonds These Materials
- ABS plastic
- Acrylic
- Fiberglass
- FRP (Fiber Reinforced Plastic)
- Glass
- PVC
- SMC (Sheet Molding Compound)
- Steel
- Styrene
- Vinyl
- Wood
- Most hard and soft plastics
- Composites
- Ceramics
Directions for Use
- Protect: Work area must be protected from accidental spills
- Clean: Surfaces must be clean, dry and free of grease and oil
- Prepare: Roughen smooth surfaces using abrasives or sandpaper
- Open Package: Remove syringe and cut off tips of both nozzles
- Dispense: Depress plunger to dispense Part A and Part B
- Mix: Mix thoroughly on a clean, discardable surface for 2-3 minutes until evenly colored
- Apply: Apply small amount to both surfaces and assemble parts immediately (working time approximately 5 minutes)
- Cure: Usable strength reached in 4 hours at 72°F (22°C)
Important Notes
WARNING: Will not bond most polyethylene or polypropylene plastics.