Learner + Provisional 1 Driver Plate - L + P1 Plate
What You Might Need To Know
- Can be used in all states except NSW - NSW require plates to be displayed on the exterior of the vehicle.
- All states require Plates to be displayed so that the entire Plate is visible at all times avoid the strip at the top of the front windscreen that could obscure the plate.
- Some states recommend external Plates for better visibility. Tinted window films will greatly reduce the visibility of the plates, which could lead to a breach of these rules.
- The suction cup mounting for plates are designed to stick onto the inside of the front and rear windscreens.
Tips From Our Team
- If the suction cups are folded, give them a hot bath (a coffee cup works well, minus the coffee) to soften the material. You will find they usually respond quickly to the soak and will be ready to work again.
- The suction mounts make these easy to take from vehicle to vehicle, keep a set in a work or gym bag in-case you need to save the day.
- Welcome to the exhilarating experience of driving! Stay calm and do your best whilst learning, not every driver picks it up equally but we are all out there together, display these plates with Pride!! Most of us learnt how to drive at some point in our lives, we hope that everyone remembers to demonstrate patience whilst you get up to speed! Remember that you have a M.A.T.E. that is here for the journey ahead.
Reversible Design
The Plate will transition from L to P1 by flipping the plate on the mounts.
Easy Installation
When applying to the inside of the front or rear windscreen, wipe the glass clean, mount the small end of the suction cups into the slots in the plate, then press the larger end of the suction cup onto the glass. Check you have the right side displayed on the outside.
Easy Removal
No adhesive here! If you have nails you can lift the edge of the suction cup to break the seal and release the plate. Otherwise give the suction cup a pull and with little force it should break the seal.
What's Included
- 2 x Reversible L + P1 Plates
- 4 x Suction Cup mounts