Nulon Green Coolant Premix
Designed specifically to suit Australian conditions, Nulon Green Coolant Premix provides comprehensive anti-boil, anti-freeze and corrosion protection for a wide range of vehicle cooling systems requiring a Green Type A Coolant.
Key Features
- Long Life Protection - Provides maximum protection for cooling systems for up to 350,000 km when used as a complete service fill
- Advanced Inhibitor Technology - Contains advanced inhibitor technology for maximum corrosion protection of all cooling system metals
- Multi-Metal Protection - Protects aluminium, steel, cast iron, solder, copper and brass
- High Boil Point - Designed to suit Australian conditions with high boil point for maximum protection
- Complete System Safety - Safe for all hoses, gaskets and seals
Directions for Service Refill
Refer to the owner’s manual for cooling system capacity. We recommend using Nulon Radiator Flush and Clean before using this product.
- Ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose
- To completely flush the system, continue to add clean water until all remnants of the old coolant have been flushed from the system
- Replace the drain plug or bottom radiator hose
- Add Nulon Multi-Vehicle Coolant Pre-Mix to the radiator first then top-up with clean, soft or demineralised water
- Check the coolant level is correct when system is cool
As Top-up to Existing Coolant
Add as a top-up to existing coolant, then start the engine and turn the heater on. When the engine is warm, turn it off and allow it to cool. Check the coolant level and top-up if necessary.
Important Warnings
- Never mix coolants from different manufacturers
- Never mix green coolant with red or blue
- If in doubt, flush the system and do a complete coolant change
Safety Information
Harmful if swallowed. Avoid release to the environment. Dispose of contents/container in accordance with local council regulations.